Model: JPD 4-54 PT |
Manufacturer: GRUNDFOS |
The JPD PT-V is a self-priming centrifugal booster unit for suction up to 27 meters. It consists of a JPD pump, a pressure switch, a pressure gauge, a diaphragm tank. The pump body is made of cast iron. The high suction is achieved by means of an ejector to be inserted into wells as narrow as 10cm (4") diameter. The JPD PT is available with an 18-litre vertical diaphragm tank
Liquid: |
||||
Pumped liquid: |
|
Water |
||
Liquid temperature range: |
|
0 .. 35 °C |
||
Liquid temperature during operation: |
|
20 °C |
||
Density: |
|
998.2 kg/m³ |
||
Technical: |
||||
Actual calculated flow: |
|
3.6 m³/h |
||
Resulting head of the pump: |
|
25.79 m |
||
Primary shaft seal: |
|
BBVP |
||
Approvals on nameplate: |
|
CE,SNI |
||
Curve tolerance: |
|
ISO9906:2012 3B |
||
Materials: |
||||
Pump housing: |
|
Cast iron |
||
|
|
EN 1561 EN-GJL-200 |
||
Impeller: |
|
Composite |
||
Installation: |
||||
Range of ambient temperature: |
|
-10 .. 40 °C |
||
Maximum operating pressure: |
|
6 bar |
||
Pump inlet: |
|
G 1 |
||
Pump outlet: |
|
G 1 |
||
Electrical data: |
||||
Power input - P1: |
|
930 W |
||
Mains frequency: |
|
50 Hz |
||
Rated voltage: |
|
1 x 220-240 V |
||
Rated current: |
|
4.3 A |
||
Capacitor size - run: |
|
16 µF/450 V |
||
Enclosure class (IEC 34-5): |
|
IP44 |
||
Insulation class (IEC 85): |
|
F |
||
Length of cable: |
|
2 m |
||
Type of cable plug: |
|
SCHUKO |
||
Tank: |
||||
Volume of pressure tank: |
|
18 l |
||
Others: |
||||
Net weight: |
|
23 kg |
||
Gross weight: |
|
24 kg |
||